1 (edited by Sascha_77 2013-09-14 16:47:23)

Topic: Spamas. doesn´t filter Custom entries / Roundcube Filters doesn´t work

==== Required information ====
- iRedMail version:
- Store mail accounts in which backend (LDAP/MySQL/PGSQL):
- Linux/BSD distribution name and version:
- Related log if you're reporting an issue:
====

Good morning.

Installed iRedMail 0.8.5 a few days before on my Debian 7x64 System. All is working fine. But the Filter seems to be dead. I entered

header LOCAL_DEMONSTRATION_SUBJECT      Subject =~ /\bPartner\b/i
score LOCAL_DEMONSTRATION_SUBJECT       +9.0

in the local.cf of assassin. If I write a Testmail with the Subject "Partner" nothing happens. No spam mark. Thats the snippet of the Mail-Log:

ep 14 10:34:47 istation postfix/qmgr[25430]: 6F882823D7: from=<SOURCE@web.de>, size=1769, nrcpt=1 (queue active)
Sep 14 10:34:47 istation amavis[17451]: (17451-09) Passed CLEAN {RelayedOutbound}, LOCAL [212.227.17.11]:52465 [176.199.45.249] <SOURCE@web.de> -> <info@tld.de>, Queue-ID: 9D836822FF, Message-ID: <trinity-5391a7f9-e685-40cb-a22e-6de9dc36911e-1379147670910@3capp-webde-bs05>, mail_id: 5raWlv6EVujJ, Hits: 0.201, size: 1317, queued_as: 6F882823D7, 1772 ms
Sep 14 10:34:47 istation postfix/smtp[26515]: 9D836822FF: to=<info@tld.de>, relay=127.0.0.1[127.0.0.1]:10024, delay=3.5, delays=1.5/0.02/0.01/2, dsn=2.0.0, status=sent (250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as 6F882823D7)
Sep 14 10:34:47 istation postfix/qmgr[25430]: 9D836822FF: removed
Sep 14 10:34:47 istation postfix/virtual[26521]: 6F882823D7: to=<info@tld.de>, relay=virtual, delay=0.3, delays=0.06/0.03/0/0.21, dsn=2.0.0, status=sent (delivered to maildir)
Sep 14 10:34:47 istation postfix/qmgr[25430]: 6F882823D7: removed

Any clue?

Another thing .... the Filter in Roundcube (0.9.2) didn´t work. The entry "managesieve" is there. But the filters inside has no effect.


Additional here my postconf:

alias_database = hash:/etc/postfix/aliases
alias_maps = hash:/etc/postfix/aliases
allow_min_user = no
allow_percent_hack = no
append_dot_mydomain = no
biff = no
bounce_queue_lifetime = 4h
broken_sasl_auth_clients = yes
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
disable_vrfy_command = yes
dovecot_destination_recipient_limit = 1
enable_original_recipient = no
home_mailbox = Maildir/
inet_protocols = ipv4
mailbox_command = /usr/lib/dovecot/deliver
mailbox_size_limit = 0
maximal_backoff_time = 4000s
maximal_queue_lifetime = 4h
message_size_limit = 15728640
minimal_backoff_time = 300s
mydestination = $myhostname, localhost, localhost.localdomain, localhost.$myhostname
mydomain = tld.pw
myhostname = tld.pw
mynetworks = 127.0.0.0/8
mynetworks_style = host
myorigin = tld.pw
proxy_read_maps = $canonical_maps $lmtp_generic_maps $local_recipient_maps $mydestination $mynetworks $recipient_bcc_maps $recipient_canonical_maps $relay_domains $relay_recipient_maps $relocated_maps $sender_bcc_maps $sender_canonical_maps $smtp_generic_maps $smtpd_sender_login_maps $transport_maps $virtual_alias_domains $virtual_alias_maps $virtual_mailbox_domains $virtual_mailbox_maps $smtpd_sender_restrictions
queue_run_delay = 300s
readme_directory = no
recipient_bcc_maps = proxy:mysql:/etc/postfix/mysql/recipient_bcc_maps_user.cf, proxy:mysql:/etc/postfix/mysql/recipient_bcc_maps_domain.cf
recipient_delimiter = +
relay_domains = $mydestination, proxy:mysql:/etc/postfix/mysql/relay_domains.cf
sender_bcc_maps = proxy:mysql:/etc/postfix/mysql/sender_bcc_maps_user.cf, proxy:mysql:/etc/postfix/mysql/sender_bcc_maps_domain.cf
smtp-amavis_destination_recipient_limit = 1
smtp_data_init_timeout = 240s
smtp_data_xfer_timeout = 600s
smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
smtpd_data_restrictions = reject_unauth_pipelining
smtpd_end_of_data_restrictions = check_policy_service inet:127.0.0.1:10031
smtpd_helo_required = yes
smtpd_helo_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_helo_hostname, reject_invalid_helo_hostname, check_helo_access pcre:/etc/postfix/helo_access.pcre
smtpd_recipient_restrictions = reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unlisted_recipient, check_policy_service inet:127.0.0.1:7777, check_policy_service inet:127.0.0.1:10031, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
smtpd_reject_unlisted_recipient = yes
smtpd_reject_unlisted_sender = yes
smtpd_sasl_auth_enable = yes
smtpd_sasl_authenticated_header = no
smtpd_sasl_local_domain =
smtpd_sasl_path = ./dovecot-auth
smtpd_sasl_security_options = noanonymous
smtpd_sasl_type = dovecot
smtpd_sender_login_maps = proxy:mysql:/etc/postfix/mysql/sender_login_maps.cf
smtpd_sender_restrictions = permit_mynetworks, reject_sender_login_mismatch, permit_sasl_authenticated
smtpd_tls_CAfile = /etc/ssl/certs/iRedMail_CA.pem
smtpd_tls_cert_file = /etc/ssl/certs/iRedMail_CA.pem
smtpd_tls_key_file = /etc/ssl/private/iRedMail.key
smtpd_tls_loglevel = 0
smtpd_tls_security_level = may
smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
smtpd_use_tls = yes
swap_bangpath = no
tls_random_source = dev:/dev/urandom
transport_maps = proxy:mysql:/etc/postfix/mysql/transport_maps_user.cf, proxy:mysql:/etc/postfix/mysql/transport_maps_domain.cf
virtual_alias_domains =
virtual_alias_maps = proxy:mysql:/etc/postfix/mysql/virtual_alias_maps.cf, proxy:mysql:/etc/postfix/mysql/domain_alias_maps.cf, proxy:mysql:/etc/postfix/mysql/catchall_maps.cf, proxy:mysql:/etc/postfix/mysql/domain_alias_catchall_maps.cf
virtual_gid_maps = static:2000
virtual_mailbox_base = /var/vmail
virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql/virtual_mailbox_domains.cf
virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql/virtual_mailbox_maps.cf
virtual_minimum_uid = 2000
virtual_transport = dovecot
virtual_uid_maps = static:2000

----

Spider Email Archiver: On-Premises, lightweight email archiving software developed by iRedMail team. Supports Amazon S3 compatible storage and custom branding.

2 (edited by Sascha_77 2013-09-14 21:10:40)

Re: Spamas. doesn´t filter Custom entries / Roundcube Filters doesn´t work

Ok I think i found whats the problem. Installed iredMail on a clean System and checked the Logfile after receiving a mail where the filter kicks in:

On the fresh machine there is:

postfix/pipe[3990]: E753EBC0B50: to=<postmaster@tld.me>, relay=dovecot, delay=0.07, delays=0/0.01/0/0.05, dsn=2.0.0, status=sent (delivered via dovecot service)


And on the machine where this is not working:


postfix/virtual[3451]: B0ECB82346: to=<info@tld.me>, relay=virtual, delay=0.17, delays=0.08/0.02/0/0.06, dsn=2.0.0, status=sent (delivered to maildir)

Why it uses the virtual relay instead of the devocot relay?

3

Re: Spamas. doesn´t filter Custom entries / Roundcube Filters doesn´t work

Did you configure per-user or per-domain transport for this user or domain?
iRedMail uses 'dovecot' as default transport.

4 (edited by Sascha_77 2013-09-28 06:45:57)

Re: Spamas. doesn´t filter Custom entries / Roundcube Filters doesn´t work

ZhangHuangbin wrote:

Did you configure per-user or per-domain transport for this user or domain?
iRedMail uses 'dovecot' as default transport.

I used the config which the Installer creates. Here is my

/etc/postfix/mysql/transport_maps_domain.cf
............
query       = SELECT transport FROM domain WHERE domain='%s' AND active=1

/etc/postfix/mysql/transport_maps_user.cf
............
SELECT mailbox.transport FROM mailbox,domain WHERE mailbox.username='%s' AND mailbox.domain='%d' AND mailbox.domain=domain.domain AND mailbox.transport<>'' AND mailbox.active=1 AND mailbox.enabledeliver=1 AND domain.backupmx=0 AND domain.active=1



Where I must look for the config if its not the above?

If I create a new Usermailbox in the working/filtered domain it works. If i create one in another domain it doesn´t work.

5

Re: Spamas. doesn´t filter Custom entries / Roundcube Filters doesn´t work

Ok I have it.

Looked into the "vmail"-DB

- Table Domain
- Select Field "Domain" and show data/edit
- Fieldname "transport"

There you can define if the domain should be virtual or devocot.